My initial crude drawings didn’t give me a sense of the proportions of the apron heights. I wanted to see how it would look with the 3.5” height against the 14” leg all assembled. So I made a real sketchup to size…
I think it looks okay. This was done quickly this morning and without all the curves or exact spacing in the lengths of each cloud lifts, but gives me a good idea that it will look fine. The legs will each have a bit carved out of the outer corner edge too.
I can’t wait to get back to working on it next wekeend.
-- - Eric Indianapolis, IN
6 comments so far
patron
home | projects | blog
9588 posts in 1140 days
#1 posted 92 days ago
well from a dogs perspective
looks good enough
to eat off of
-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle
Eric_S
home | projects | blog
1501 posts in 994 days
#2 posted 92 days ago
Thanks, David. Its nicer than the table my wife and I eat off as of now. Hopefully that will change soon.
-- - Eric Indianapolis, IN
JohnMeeley
home | projects | blog
180 posts in 132 days
#3 posted 92 days ago
I was hoping for the .skp file :(
Can’t wait to see more.
-- "The greatest pleasure in life is doing what others say you cannot do."-Walter Bagehot
Eric_S
home | projects | blog
1501 posts in 994 days
#4 posted 92 days ago
John, send me a PM with your e-mail and I’ll forward it to you. Just know its pretty crude, but the overall dimensions I think are accurate. The placement of the plugs though aren’t, etc.
-- - Eric Indianapolis, IN
lew
home | projects | blog
8177 posts in 1554 days
#5 posted 92 days ago
Ninja is going to be the envy of all his friends!
-- Lew- Time traveler. Purveyor of the world's finest custom rolling pins!
kenn
home | projects | blog
565 posts in 1518 days
#6 posted 91 days ago
I was worried people would think I was nuts for dovetailing my dogs feeding stations! You’ve got me beat!
-- Every cloud has a silver lining
Have your say...